October 27, 2008 -  Oil Filler Door, Cowl

I riveted the oil filler door to the hinge, again using the Main Squeeze.  You can see where I applied and sanded Rage Gold to feather in the fiberglass strip over the hinge/cowl rivets. 
   
Next I epoxied glass over the door rivets, then covered with peel ply.
    
I expoxied fiberglass strips to the rivet lines on the lower cowl. 
    
Close-up shot.
    
I finally riveted the rubber strips to the airbox inlet per the instructions. 
   
 
Previous
Home
Next