May 28, 2008 - Spinner, Oil Filler Door

You can see the spinner fits but the spacing between prop and spinner is a little tight.
   
Better.
   
 Just right.
   
Back to the oil filler door.  Using the hinge as a template, I drilled the hinge to the top cowl.
   
Then drilled the hinge to the door.
   

Not bad.  My Camloc kit from Mil-Spec came with two camlocs to use on the oil filler door.  Much preferable to the two wing-nut type fasteners that came with the kit.  
   
 
Previous
Home
Next