July 1, 2007 - Panel: Dynon Cut-out
Then I used the jig-saw, Dremel tool and files to finish the rectangular
hole.
July 1, 2007 - Panel: Dynon Cut-out |
||||||
| The next cut-out after the Mapbox would be the Dynon. I drilled #40 holes in the corner, then big 3/4" holes with the Unibit near the corners. | ||||||
|
|
||||||
|
Then I used the jig-saw, Dremel tool and files to finish the rectangular
hole.
|
||||||
|
|
||||||