January 4, 2008 - Misc Stuff
 I put the blue prop control cable in. 
    
I hooked the (yellow) Dynon "keep alive" wire to the always hot battery bus.  My Dynon has a backup battery.  It came fully-charged but I accidently turned the Dynon on and depleted the battery.  The keep alive wire is supposed to trickle-charge the Dynon battery, but it wasn't working.  I looked on the Dynon support web page -- they suggested updating the firmware on the Dynon unit.  So I'll give that a try - I'm pretty sure that will work.
    
I bolted the "roll bar" bracket to the airframe.  I won't attach the roll bar itself as it would make the fuse too large to get out my basement window.
    
 I was testing out my Intercom system by plugging my daughter's I-pod into the intercom music jack.  It worked great -- I could hear stereo music through the headphones.  I can't tell you what the song was, but it wasn't half bad. 
    
 
Previous
Home
Next