Bill's RV-7 Project

October 11, 2006 - Rib/Panel/Skin Prep

Then it was upstairs to deburr the skin and dimple the side holes with Main Squeeze. Later on Lynnette and I used the C-Frame to dimple the inner holes of the skin. I had never got around to dimpling the two aft top skins so we did those too. Just like old times.

October 11, 2006 - Rib/Panel/Skin Prep

I disassembled the forward upper fuselage and started the fun job of deburring, edge-smoothing and dimpling. You know the drill. It wasn't too bad; I sat on the couch and watched TV while I did it.

Then it was upstairs to deburr the skin and dimple the side holes with Main Squeeze. Later on Lynnette and I used the C-Frame to dimple the inner holes of the skin. I had never got around to dimpling the two aft top skins so we did those too. Just like old times.