April 10, 2006 - Upper Baggage Bulkhead
After trimming, I smoothed the edges.
No pre-drilled holes on this piece. I measured the location of all
the holes, started them with a #40, then enlarged them to #30.
April 10, 2006 - Upper Baggage Bulkhead |
||||||
| Time to start working on the upper baggage bulkhead. First I trimmed the bulkhead according to the drawings. One edge has a bend in it and the drawings don't indicate whether it goes on top or bottom. I decided top. Hope I'm right. | ||||||
|
|
||||||
|
After trimming, I smoothed the edges.
|
||||||
|
|
||||||
|
No pre-drilled holes on this piece. I measured the location of all
the holes, started them with a #40, then enlarged them to #30.
|
||||||
|
|
||||||
|
|
||||||