July 10, 2004 - Wing Rear Spars
My edge smoothing tools: the edge scraper and emery cloth.
The rear spars are too long to use the bench grinder with scotch-brite
wheel which is the preferred way to get a nice smooth edge quickly.
July 10, 2004 - Wing Rear Spars |
||||
| On to something new! Now it's the rear wing spars. First step, smooth the edges. | ||||
|
||||
|
My edge smoothing tools: the edge scraper and emery cloth.
The rear spars are too long to use the bench grinder with scotch-brite
wheel which is the preferred way to get a nice smooth edge quickly.
|
||||
|
||||
| Next I have to trim the ends of these reinforcer plates. Out comes the trusty hacksaw. | ||||
|
||||
| Action shot using the hacksaw. | ||||
|
||||
| Some of the trimming is too minor for the hacksaw so I use the vixen file instead. | ||||
|
||||
| Reward for a job well done: a delicious looking BLT. | ||||
|
||||