August 20, 2008 - Rivet VS Tip

 After all this time, I finally riveted the tip to the Vertical Stabilizer.  Standard flush-head pop-rivets. 
  
I sanded the gloss off the wingtips.  Then I cleaned them off with water.  Next I wiped them down with acetone.  Finally I applied the Loehle WonderFil (pin hole filler) which is almost like a wax.  They are ready for priming and painting. 
  
I sanded the Rage Gold filler on the Rudder bottom tip for what seems like the tenth time over a period of three years.  But it's done now.  Ready for priming and painting. 
 
 
Previous
Home
Next